Configuration

General remarks

• Customer Owners/Admins of ANITRA devices can access and modify device configuration
  • from Device List
    
  • from Device Profile
    

• Configuration is managed in the dedicated application screen

Orientation and context

• changes done by users are visualized by blue and red icons
  • unsaved modifications in the configuration are visualized by blue (see no.1)
    • a tooltip hint shows saved vs modified value (see no.5)
    • you can revert to the original value by clicking the particular "pen" icon (at the particular value or group level)
    • closing the screen removes all the unsaved (blue) modifications
  • for applying the modified parameters press the "Save and send" button (see no.3)
    • by doing so, all the blue "pens" will turn to the (waiting) red "clock" icons (see no.2)
    • until the values are not confirmed by the device
      • you can discard the pending value by clicking the particular "clock" icon (at the particular value or group level)
      • you can discard all pending changes by clicking "Discard pending changes" button (see no.4)
• icons (see no. 6) indicate the workflow status of each value (edited >> waiting >> confirmed)
• question mark icon (see no.7) displays in the tooltip hint the default value for each parameter

Configuration delivery and application

• configuration is applied whenever Device connects to communicate (sending data)
• only the modified configuration parameters are sent in order to optimize the traffic
• by default the configuration is sent and delivered to the device via GPRS data
• an alternative delivery channel is SMS ("Send by SMS" button)
  • using SMS might help to deliver configuration in areas with poor data coverage but please note that using SMS has certain limitations
    • SMS delivery is not guaranteed which might cause inconsistency in device configuration temporarily
    • just part of the full configuration scope can be fit into single configuration SMS ("Sent by SMS" button is only available till all the modifications fit into one SMS message)
    • additional charges might be applied when using SMS

Configuration structure/areas

• Admin Configuration
  • not available to users
  • a range of admin parameters which controls basic device behavior, allows remote troubleshooting, firmware upgrades, etc.

• User configuration: covers the following aspects of device behavior
  • Data collection settings (GPS/sensor frequencies, activity, mortality, geofencing, data bursts, etc)
  • Communication settings
  • Storage mode (sleep, power off)

Data collection settings

GPS/sensor sampling

• configurable using solar or human time
  • "solar time"
    • the device synchronizes the data collection to local GPS time based on GPS.
    • comfortable day/night transition set up (sun angles above the horizon). Visual control over the settings
    • sampling frequency for day/night entered parallel in seconds, minutes or hours
    • easy synchronization between various animals
  • "human time"
    • 24hours cyclic GPS/sensor frequency setting (day/night ignored)
    • the cycle starts at the pre-defined hour (UTC)

Activity triggered data collection

• checkboxes for two different algorithms detecting movement
• trigger 1: a slot fixed for a generic algorithm detecting movement from the accelerometer
• trigger 2: a slot ready for other customized movement detection algorithm(s). Up to 12 variable algorithms can be implemented on request and assigned to the trigger no.2
• a sensitivity range for each of the algorithms available

Activity Estimation

• a checkbox to switch on continuous activity estimation
• activity is measured twice a minute which allows construction of very detailed activity journal
• note: this functionality is not data intensive (no additional data costs) but it consumes some energy on top of regular GPS/communication cycles

Mortality detection

• a dedicated mortality detection functionality
• allows detecting mortality of the tracked individual very quickly and reliably
• species (or even individual) calibration of the detection sensitivity possible
• calibration parameters are
  • the detection sensitivity level
  • the number of confirmation cycles (interval of 30 seconds) before the mortality warning is raised
• when turned on, the functionality consumes some extra energy

Geofencing using POIs

• Adjustment of basic data collection cycles based on location (Geofencing using Points of Interest (POIs))
• definition consists of
  • GPS position of the center of POI
  • radius/range from the center of the circle
  • modified day/night data collection interval
• up to 20 static POIs with different configurations can be defined for each device
• mapping to the database of Nests, Pylons or other POIs
• ready for dynamic POIs synchronization (the tag downloads definition for 20 geographically closest POIs)

GPS/sensor bursts

• detaild

Communication schedules

Fixed times

• four fixed time slots a day

Alternative schedules

• three additional comfortable data delivery schedules
  • Human time: cyclic frequency + adjustable cycle sync start
  • Solar time: option of different communication timer during day and night
  • Data: communication can be launched whenever a defined number of records collected by the logger

One-off schedule

• allows scheduling a single communication at particular date and time (e.g. data to be pushed to the server while performing a field check)

Storage mode

• allows to power off devices and configure timeslot for regular device/battery state notification only (i.e. device wakes up only to report battery state at predefined day hour each X days)