Difference between revisions of "TRACKING ANIMAL"

Revision as of 11:47, 2 November 2021

For maximum benefit of a full array of Anitra functionality (data filtering, mortality warnings, advanced sharing, etc.) we highly recommend to maintain "Device Statuses" for your devices and Tracked Objects for your study animals up to date.

more details here.

1. Deployed Active:

Known to be currently delivering data reliably and new data expected to be updated on a regular basis
Mortality notification should work reliably

2. Deployed Down:

Known to be still delivering data (at least for some time), but based on data received the device very likely not already attached to the target animal (shed/down logger, the killed animal)
Hardware to be either recollected or written-off
"New data" notifications could help investigate the case until the logger transmits data
After collecting all possible information and closing the case the device should be turned to "Archive" status

3. Deployed Missing:

Data delivery suddenly interrupted, last positions do not show animal/logger issue
"New data" notifications possibly used to notify on the restoration of data transfer

4. Deployed Problem:

Depending on the issue type the data delivery fails or some sensor data might be unreliable
Allows suppressing mortality notification as false or confusing warnings may be raised

meant for "out of use" devices (inactivated, suspended, finished) not expected to deliver any new data
Turning device into this state allows suppressing warning scheme
Allows to store and filter out archive data
Note that devices created through import functionality are by default switched to this state

Device Statuses are meant to help to control active Loggers >> Tracked Objects (Trackings). In order to receive a meaningful warning, it is highly recommended not only to turn inactive devices to Archive but also to end related active Tracked Objects (Trackings) whenever the tracking in the field is over (i.e. you do not expect to receive any new data).
- Ending Tracked Object / Tracking is done by filling in date into field "End of tracking" in the Tracking profile
- "End Of Tracking" field leaves space for individual interpretation. For instance in case of mortality you can include the period when the tracked individual was alive only or you might as well close the tracking date later when the device was physically found and removed.
- Note that you can additionally enter more detail related to mortality event ("Estimated date of death", "Mortality Reason", "Mortality Note", "Mortality Photos/Documents/Reports")

Mortality warnings

Notifies on possible mortality in the last position of finished (archive) trackings
You can set the end date of tracking so that the mortality sign is displayed in your archive data (see the end date for the first two tracked objects in example no 1)

Warns on possible mortality detected in the last position of active trackings
In order to have relevant red warnings shown correct device/TO configuration needs to be kept by project admin

Note. the detection of mortality is currently based on

Anitra: dedicated sensor/accelerometer mortality detection logic
Ornitela: identical body position between subsequent measurements
Ecotone Activity column with a simple rule (Activity < 10) triggering the alert. More complex logic is being developed for Anitra native devices

You can find these last data mortality warnings on various screens of the Anitra platform:
- Device list (only Red warning for Active trackings)

Tracking List (both Red warnings for Active trackings and Black Info for Archive trackings)

Map (both Red warnings for Active trackings and Black Info for Archive trackings)

Device Owner/Admins can freely switch devices from one state to another and modify Tracking end dates in order to achieve desired Anitra behavior