CONFIGURATION

General remarks

Customer Owners/Admins of ANITRA devices can access and modify device configuration
- from Device List
- from Device Profile

changes done by users are visualized by blue and red color
900px
- unsaved modifications in the configuration are visualized by blue (see no.1)
  - a tooltip hint shows saved vs modified value (see no.5)
  - you can revert to the original value by clicking the particular "pen" icon (at the particular value or group level)
  - closing the screen removes all the unsaved (blue) modifications
- for applying the modified parameters press the "Save and send" button (see no.3)
  - by doing so, all the blue "pens" will turn to the (waiting) red "clock" icons (see no.2)
  - until the values are not confirmed by the device
    - you can discard the pending value by clicking the particular "clock" icon (at the particular value or group level)
    - you can discard all pending changes by clicking "Discard pending changes" button (see no.4)
icons (see no. 6) indicate the workflow status of each value (edited >> waiting >> confirmed)
question mark icon (see no.7) displays in the tooltip hint the default value for each parameter

configuration is applied whenever Device connects to communicate (send data)
only modified config parameters are sent in order to optimize traffic
by default the configuration is sent and delivered to the device via GPRS data
an alternative delivery channel is SMS ("Send by SMS" button)
- using SMS might help to deliver configuration in areas with poor data coverage but please note that using SMS has certain limitations
  - SMS delivery is not guaranteed which might cause inconsistency in device configuration temporarily
  - just part of the full configuration scope can be fit into single configuration SMS ("Sent by SMS" button is only available till all the modifications fit into one SMS message)
  - additional charges might be applied when using SMS

User configuration: covers the following aspects of device behavior
- Data collection settings (GPS/sensor frequencies, activity, mortality, geofencing, data bursts, etc)
- Communication settings
- Storage mode (sleep, power off)
Admin Configuration:
- a range of additional admin parameters which control basic device behavior, allows remote troubleshooting, firmware upgrades, etc.

GPS/sensor sampling
- configurable based on both solar or human time)
- comfortable day/night transition set up
Data collection triggered by activity
Continuous Activity Estimation
Dedicated Mortality detection functionality
Adjustment of basic data collection cycles based on location (Geofencing using Points of Interest (POIs))
Communication schedules

"Fixed times" - four fixed time slots a day
"Alternative schedules" - three additional comfortable data delivery planners
- Human time: cyclic frequency + adjustable cycle sync start
- Solar time: option of different communication timer during day and night
- Data: communication can be launched whenever a defined number of records collected by the logger
One-off schedule: allows scheduling a single communication at particular date and time (e.g. data to be pushed to the server while performing a field check)

allows to power off devices and configure timeslot for regular device/battery state notification only (i.e. device wakes up only to report battery state at predefined day hour each X days)