Konfigurace

Obecné poznámky

• Majitelé a administrátoři zařízení ANITRA mají přístup k jejich konfiguraci a mohou ji modifikovat
  • Ze seznamu zařízení (Device List)
    
  • Z profilu zařízení (Device Profile)
    

• Konfiguraci je možné modifikovat v příslušném okně aplikace

Orientace a kontext

• Uživatelem provedené změny jsou vizualizovány modrými a červenými ikonami
  • Neuložené změny konfigurace jsou zvýrazněny modrou (viz.obr.1)
    • Nápověda v bublině ukazuje uloženou vs. modifikovanou hodnotu (viz.obr.5)
    • K původní hodnotě se můžete vrátit kliknutím na příslušnou ikonu "pera" (vždy u konkrétní hodnoty nebo skupinové úrovně)
    • Zavřením obrazkovky zmizí všechny neuložené (modré) modifikace
  • Pro aplikování modifikovaných parametrů klikněte na tlačítko "Uložit a odeslat (Save and send)" (viz.obr.3)
    • Všchna modré ikony "pera" se změní na červené (označující čekání) ikony hodin (viz.obr.2)
    • Dokud hodnoty nejsou potvrzeny zařízením
      • Zahájené změny je možné zrušit kliknutím na příslušnou ikonu "hodin" (vždy u konkrétní hodnoty nebo skupinové úrovně)
      • Všechny zahájené změny lze zrušit kliknutím na tlačítko "Zrušit zahájené změny" (viz.obr.4)
• Ikony (viz.obr.6) ukazují pracovní status každé hodnoty (editováno >> čekající >> potvrzeno)
• Otazníková ikona question mark icon (see no.7) displays in the tooltip hint the default value for each parameter

Configuration delivery and application

• configuration is applied whenever Device connects to communicate (sending data)
• only the modified configuration parameters are sent in order to optimize the traffic
• by default the configuration is sent and delivered to the device via GPRS data
• an alternative delivery channel is SMS ("Send by SMS" button)
  • using SMS might help to deliver configuration in areas with poor data coverage but please note that using SMS has certain limitations
    • SMS delivery is not guaranteed which might cause inconsistency in device configuration temporarily
    • just part of the full configuration scope can be fit into single configuration SMS ("Sent by SMS" button is only available till all the modifications fit into one SMS message)
    • additional charges might be applied when using SMS

Configuration structure/areas

• Admin Configuration
  • not available to users
  • a range of admin parameters which controls basic device behavior, allows remote troubleshooting, firmware upgrades, etc.

• User configuration: covers the following aspects of device behavior
  • Data collection settings (GPS/sensor frequencies, activity, mortality, geofencing, data bursts, etc)
  • Communication settings
  • Storage mode (sleep, power off)

Data collection settings

GPS/sensor sampling

• configurable using solar or human time
  • "solar time"
    • the device synchronizes the data collection to local GPS time based on GPS.
    • comfortable day/night transition set up (sun angles above the horizon). Visual control over the settings
    • sampling frequency for day/night entered parallel in seconds, minutes or hours
    • easy synchronization between various animals
      
  • "human time"
    • 24hours cyclic GPS/sensor frequency setting (day/night ignored)
    • the cycle starts at the pre-defined hour (UTC)
      900px.JPG

Activity triggered data collection

• checkboxes for two different algorithms detecting movement
• trigger 1: a slot fixed for a generic algorithm detecting movement from the accelerometer
• trigger 2: a slot ready for other customized movement detection algorithm(s). Up to 12 variable algorithms can be implemented on request and assigned to the trigger no.2
• a sensitivity range for each of the algorithms available
  

Activity Estimation

• a checkbox to switch on continuous activity estimation
• activity is measured twice a minute which allows construction of very detailed activity journal
• note: this functionality is not data intensive (no additional data costs) but it consumes some energy on top of regular GPS/communication cycles
  

Mortality detection

• a dedicated mortality detection functionality
• allows detecting mortality of the tracked individual very quickly and reliably
• species (or even individual) calibration of the detection sensitivity possible
• calibration parameters are
  • the detection sensitivity level
  • the number of confirmation cycles (interval of 30 seconds) before the mortality warning is raised
• when turned on, the functionality consumes some extra energy
  

Geofencing using POIs

• an adjustment of basic data collection cycles based on geographic location
• the definition consists of
  • GPS position of the center of POI + radius/range from the center of the circle
  • modified day/night data collection interval
• up to 20 static POIs with different configurations can be defined for each device
• flexible mapping to the database of Nests, favorite perches, Pylons or other POIs
• ready for dynamic POIs synchronization (the tag downloads definition for 20 geographically closest POIs)
  

GPS/sensor bursts

• switching device to collect the raw GPS/sensor data
• energy and data-intensive mode
• maximum frequency of 250HZ
• data bursts can be triggered with or without GPS fixing
• minimum battery level restriction to trigger the burst

Communication schedules

Fixed times

• four fixed time slots a day
  

Alternative schedules

• three additional comfortable data delivery schedules
  • Human time: cyclic frequency + adjustable cycle sync start
    
  • Solar time: option of different communication timer during day and night
    
  • Data: communication launched whenever a defined number of records collected by the logger
    

One-off schedule

• allows scheduling a single communication at particular date and time (e.g. data to be pushed to the server while performing a field check)
  

Storage mode

• allows to power off devices and configure timeslot for regular device/battery state notification only (i.e. device wakes up only to report battery state at predefined day hour each X days)